Rotary drilling rig split drill

Rotary drilling rig split bit is mainly suitable for soft rock and extremely soft rock formations such as mudstone, muddy sandstone, which are easy to lay.

Notes on the use of split drills:

1. When using a split drill, it is strictly forbidden to press too much, which will cause the drill to be damaged.

2. The structure of the split drill cylinder is relatively fragile. It is strictly forbidden to use the split drill to construct the medium hard rock stratum.

3. After the shaking of the pin on the top of the split drill bit is increased, it should be repaired in time to prevent the barrel deformation from increasing.

4. When the rotary drilling rig is difficult to unload the soil with the split drill, it should be opened by the drill bit slightly touching the ground to avoid unloading the slag by repeated forward and reverse rotation.

5. After the stop block of the split drill is dropped or deformed, it should be repaired in time.

Support for customizing various types of split rotary drilling rig bits.